In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Range Indicator Light Lens Replacement #3196068
Whirlpool Range Indicator Light Lens Replacement #3196068
Skill Level
Total Parts Cost
$5.00Estimated Savings
$112.5001:59
- Description
This video provides step-by-step repair instructions for replacing the indicator light lens on a Whirlpool electric range. The most common reasons for replacing the lens is if it is broken.
All of the information for this surface element switch replacement video is applicable to the following brands:
Whirlpool
Tools needed: phillips head screwdriver
All of the information for this surface element switch replacement video is applicable to the following brands:
Whirlpool
Tools needed: phillips head screwdriver
Step By Step Instructions
1
Before you replace an indicator light lens in your range be sure to unplug the power cord.
2
Use a phillips-head screwdriver to unthread the screws securing the upper rear access panel.
3
Pull the panel down to detach.
4
Detach the indicator light from the light lens you’re replacing.
5
If still intact, push the old light lens from the back to remove.
6
Install the new indicator light lens by snapping it into the front of the control panel.
7
Now slide the light onto the new lens and snap it into place.
8
Reinstall the upper rear access panel by inserting the upper tabs under the control panel then align the bottom tab with the lower access panel.
9
Replace the screws to secure.
10
With the repair completed plug the power cord back in and your range should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the indicator light lens on a Whirlpool electric range. The most common reasons for replacing the lens is if it is broken.
All of the information for this surface element switch replacement video is applicable to the following brands:
Whirlpool
Tools needed: phillips head screwdriver
All of the information for this surface element switch replacement video is applicable to the following brands:
Whirlpool
Tools needed: phillips head screwdriver
Step-By-Step Instructions
1
Before you replace an indicator light lens in your range be sure to unplug the power cord.
2
Use a phillips-head screwdriver to unthread the screws securing the upper rear access panel.
3
Pull the panel down to detach.
4
Detach the indicator light from the light lens you’re replacing.
5
If still intact, push the old light lens from the back to remove.
6
Install the new indicator light lens by snapping it into the front of the control panel.
7
Now slide the light onto the new lens and snap it into place.
8
Reinstall the upper rear access panel by inserting the upper tabs under the control panel then align the bottom tab with the lower access panel.
9
Replace the screws to secure.
10
With the repair completed plug the power cord back in and your range should be ready for use.
Applicable Product Model
Related Articles & Videos