In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCraftsman Snowblower Wheel Replacement #734-1781
Craftsman Snowblower Wheel Replacement #734-1781
Total Parts Cost
$NaN01:21
- Description
This video provides step-by-step instructions for replacing a wheel on Craftsman snowblowers. The most common reason for replacing a wheel is if it doesn’t turn.
All of the information in this wheel replacement video is applicable to the following brands: MTD, Yard Machines, Huskee, Montgomery Wards, Craftsman, Yard-Man, Bolens, MasterCut
Tools used: pliers, hammer
All of the information in this wheel replacement video is applicable to the following brands: MTD, Yard Machines, Huskee, Montgomery Wards, Craftsman, Yard-Man, Bolens, MasterCut
Tools used: pliers, hammer
Step By Step Instructions
1
Before you replace a wheel on your snow blower make sure the ignition key has been removed.
2
Now carefully tip the snow blower forward so it rests on the auger housing.
3
Use pliers to pry off the push cap securing the wheel you’re replacing.
4
Slide off the old wheel.
5
Install the new wheel by sliding it onto the axle.
6
Realign the push cap then position a 9/16th inch socket and strike it with a mallet to secure the cap.
7
Return the snow blower to its upright position.
8
With the repair completed reinsert the ignition key and your snow blower should be ready for use.
Description
This video provides step-by-step instructions for replacing a wheel on Craftsman snowblowers. The most common reason for replacing a wheel is if it doesn’t turn.
All of the information in this wheel replacement video is applicable to the following brands: MTD, Yard Machines, Huskee, Montgomery Wards, Craftsman, Yard-Man, Bolens, MasterCut
Tools used: pliers, hammer
All of the information in this wheel replacement video is applicable to the following brands: MTD, Yard Machines, Huskee, Montgomery Wards, Craftsman, Yard-Man, Bolens, MasterCut
Tools used: pliers, hammer
Step-By-Step Instructions
1
Before you replace a wheel on your snow blower make sure the ignition key has been removed.
2
Now carefully tip the snow blower forward so it rests on the auger housing.
3
Use pliers to pry off the push cap securing the wheel you’re replacing.
4
Slide off the old wheel.
5
Install the new wheel by sliding it onto the axle.
6
Realign the push cap then position a 9/16th inch socket and strike it with a mallet to secure the cap.
7
Return the snow blower to its upright position.
8
With the repair completed reinsert the ignition key and your snow blower should be ready for use.
Applicable Product Model
Related Articles & Videos