Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Refrigerator Replace Ice Dispenser Module #W10353552
Whirlpool Refrigerator Replace Ice Dispenser Module #W10353552
Skill Level
Total Parts Cost
$120.19Estimated Savings
$112.5003:06
- Description
This video provides step-by-step instructions for replacing the ice dispenser module on Whirlpool refrigerators. The most common reason for replacing the ice dispenser module is if it won’t dispense ice or water.
All of the information in this dispenser module replacement video is applicable to the following brands: Whirlpool, Maytag, KitchenAid
Tools used: flat-head screwdriver, 5/16” wrench, 1/4” socket or nut driver
All of the information in this dispenser module replacement video is applicable to the following brands: Whirlpool, Maytag, KitchenAid
Tools used: flat-head screwdriver, 5/16” wrench, 1/4” socket or nut driver
Step By Step Instructions
1
Before you replace the ice door module in your refrigerator unplug the power cord.
2
Use a flat-head screwdriver to depress the retaining tabs holding the dispenser control in place.
3
Note the orientation of the wire connecters then disconnect them to fully remove the control.
4
Use a 5/16th inch wrench to depress the locking ring to release the water line from the spigot – be prepared for a small amount of water to spill.
5
Detach the line from the retaining clip.
6
Disconnect the wire harnesses, detach the grounding wire and remove the wires from the retaining clip.
7
Now use a quarter-inch socket or nut driver to remove the screws securing the ice door module.
8
Release the retaining clips and you can pull the old module free.
9
You’re now ready to install the new ice door module.
10
Align the module on the housing and snap it into position.
11
Replace the screws to secure.
12
Connect the wire harnesses, attach the grounding wire and secure the wires under the retaining clip.
13
Fully reinsert the water line into the spigot and secure the line under the retaining clip.
14
Reinstall the dispenser control by first connecting the wires to the appropriate terminals.
15
Now insert the tabs on top of the control into the housing slots and snap the control into position.
16
With the repair completed, plug the power cord back in and your refrigerator should be ready for use.
Description
This video provides step-by-step instructions for replacing the ice dispenser module on Whirlpool refrigerators. The most common reason for replacing the ice dispenser module is if it won’t dispense ice or water.
All of the information in this dispenser module replacement video is applicable to the following brands: Whirlpool, Maytag, KitchenAid
Tools used: flat-head screwdriver, 5/16” wrench, 1/4” socket or nut driver
All of the information in this dispenser module replacement video is applicable to the following brands: Whirlpool, Maytag, KitchenAid
Tools used: flat-head screwdriver, 5/16” wrench, 1/4” socket or nut driver
Step-By-Step Instructions
1
Before you replace the ice door module in your refrigerator unplug the power cord.
2
Use a flat-head screwdriver to depress the retaining tabs holding the dispenser control in place.
3
Note the orientation of the wire connecters then disconnect them to fully remove the control.
4
Use a 5/16th inch wrench to depress the locking ring to release the water line from the spigot – be prepared for a small amount of water to spill.
5
Detach the line from the retaining clip.
6
Disconnect the wire harnesses, detach the grounding wire and remove the wires from the retaining clip.
7
Now use a quarter-inch socket or nut driver to remove the screws securing the ice door module.
8
Release the retaining clips and you can pull the old module free.
9
You’re now ready to install the new ice door module.
10
Align the module on the housing and snap it into position.
11
Replace the screws to secure.
12
Connect the wire harnesses, attach the grounding wire and secure the wires under the retaining clip.
13
Fully reinsert the water line into the spigot and secure the line under the retaining clip.
14
Reinstall the dispenser control by first connecting the wires to the appropriate terminals.
15
Now insert the tabs on top of the control into the housing slots and snap the control into position.
16
With the repair completed, plug the power cord back in and your refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Control Module
$120.19
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com