In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairHomelite Pressure Washer Chemical Injector #308452002
Homelite Pressure Washer Chemical Injector #308452002
Total Parts Cost
$NaN01:53
- Description
This video provides step-by-step repair instructions for replacing the chemical injector kit (or soap injector kit) on a Homelite pressure washer. The most common reasons for replacing the injector kit are when water is getting into the soap dispenser, the chemical injector nozzle is leaking, or the pressure washer soap injector is not working at all.
All of the information for this chemical injector kit replacement video is applicable to the following brands:
Homelite, PowerStroke, Black Max, Husky, WorkForce, Ryobi
Tools needed: pinch-off pliers, 13mm wrench, flathead screwdriver
All of the information for this chemical injector kit replacement video is applicable to the following brands:
Homelite, PowerStroke, Black Max, Husky, WorkForce, Ryobi
Tools needed: pinch-off pliers, 13mm wrench, flathead screwdriver
Step By Step Instructions
1
Before you replace the chemical injector on your pressure washer first make sure the engine and pump have cooled.
2
Use locking pliers to crimp the detergent solution supply tube.
3
Now detach the tube from the old chemical injector.
4
Unthread the old injector.
5
Prepare the new chemical injector for installation by first inserting the small “o”-ring.
6
Slide the large “o”-ring over the threads.
7
Now insert the ball bearing into the injector followed by the spring.
8
Apply some lubricant to the large “o”-ring then align the new assembly with the injector port and thread it into position.
9
Attach the detergent solution tube to the new injector.
10
Remove the locking pliers and confirm that the pressure washer is working properly.
Description
This video provides step-by-step repair instructions for replacing the chemical injector kit (or soap injector kit) on a Homelite pressure washer. The most common reasons for replacing the injector kit are when water is getting into the soap dispenser, the chemical injector nozzle is leaking, or the pressure washer soap injector is not working at all.
All of the information for this chemical injector kit replacement video is applicable to the following brands:
Homelite, PowerStroke, Black Max, Husky, WorkForce, Ryobi
Tools needed: pinch-off pliers, 13mm wrench, flathead screwdriver
All of the information for this chemical injector kit replacement video is applicable to the following brands:
Homelite, PowerStroke, Black Max, Husky, WorkForce, Ryobi
Tools needed: pinch-off pliers, 13mm wrench, flathead screwdriver
Step-By-Step Instructions
1
Before you replace the chemical injector on your pressure washer first make sure the engine and pump have cooled.
2
Use locking pliers to crimp the detergent solution supply tube.
3
Now detach the tube from the old chemical injector.
4
Unthread the old injector.
5
Prepare the new chemical injector for installation by first inserting the small “o”-ring.
6
Slide the large “o”-ring over the threads.
7
Now insert the ball bearing into the injector followed by the spring.
8
Apply some lubricant to the large “o”-ring then align the new assembly with the injector port and thread it into position.
9
Attach the detergent solution tube to the new injector.
10
Remove the locking pliers and confirm that the pressure washer is working properly.
Applicable Product Model
Related Articles & Videos