Video & Articles: Appliance & Equipment RepairWhirlpool Refrigerator Rear Wheel Replacement #4388239

Whirlpool Refrigerator Rear Wheel Replacement #4388239

02:11
This video provides step-by-step instructions for replacing the rear wheels on Whirlpool refrigerators. The most common reason for replacing the wheels is when either of them is damaged or worn, causing the refrigerator to not roll correctly.

All of the information in this wheel replacement video is applicable to the following brands: Whirlpool, Kenmore, KitchenAid, Roper, Maytag, Estate, Amana, Inglis, Crosley, Ikea

Tools used: 10 in 1 screwdriver, wood block, slotted screwdriver

Step By Step Instructions

1
As with any repair, you should unplug the power cord before beginning to replace the rear rollers on your refrigerator.
2
First, remove the screw to release the water line from the rear access panel.
3
Next, remove the screws securing the rear panel.
4
Pull the panel down and out.
5
Now, carefully lift up the rear of the appliance and use a wood block or a comparable sturdy object to support it.
6
Use a flathead screwdriver to remove the retaining clip securing the mounting pin.
7
Pull out the mounting pin to release the old roller.
8
Install the new rear roller by positioning it in the frame, then secure it with the mounting pin.
9
Snap on the retaining clip to secure the pin.
10
Repeat this procedure for the other rear roller.
11
Remove the support and gently lower the appliance to the floor.
12
Slide the rear access panel into the track and reinstall the screws to secure.
13
Reposition the water line and secure it with the screw.
14
With the rear rollers installed, you're now ready to plug the power cord back in.
Description
This video provides step-by-step instructions for replacing the rear wheels on Whirlpool refrigerators. The most common reason for replacing the wheels is when either of them is damaged or worn, causing the refrigerator to not roll correctly.

All of the information in this wheel replacement video is applicable to the following brands: Whirlpool, Kenmore, KitchenAid, Roper, Maytag, Estate, Amana, Inglis, Crosley, Ikea

Tools used: 10 in 1 screwdriver, wood block, slotted screwdriver
Step-By-Step Instructions
1
As with any repair, you should unplug the power cord before beginning to replace the rear rollers on your refrigerator.
2
First, remove the screw to release the water line from the rear access panel.
3
Next, remove the screws securing the rear panel.
4
Pull the panel down and out.
5
Now, carefully lift up the rear of the appliance and use a wood block or a comparable sturdy object to support it.
6
Use a flathead screwdriver to remove the retaining clip securing the mounting pin.
7
Pull out the mounting pin to release the old roller.
8
Install the new rear roller by positioning it in the frame, then secure it with the mounting pin.
9
Snap on the retaining clip to secure the pin.
10
Repeat this procedure for the other rear roller.
11
Remove the support and gently lower the appliance to the floor.
12
Slide the rear access panel into the track and reinstall the screws to secure.
13
Reposition the water line and secure it with the screw.
14
With the rear rollers installed, you're now ready to plug the power cord back in.

Applicable Product Model

Refrigerator
Brand
Product Type
Model
Subtype
Cooling System
Icemaking System
Dispensing System
Product Diagram & Manuals
Parts Needed
Wheel
Wheel
$55.46
Total$0.00

Related Articles & Videos

03:02
Part Replacement
Whirlpool Freezer Won't Make Ice? Ice Maker Assembly #W10190965
03:51
Part Replacement
Whirlpool Refrigerator Air Damper Control Assembly #W10151374
02:50
Part Replacement
Whirlpool Refrigerator Water Dispenser Inlet Valve #W10408179
04:55
Part Replacement
Whirlpool Refrigerator Freezing Food? Temperature Control #2198202
02:55
Part Replacement
Whirlpool Freezer Won't Defrost? Defrost Thermostat #W10225581