Type: Shaded Pole; Diameter: 3.3"; HP: 1/15; Volts: 115; RPM: 3200; Speeds: 1; Amps: 2.25; Rotation: Clockwise; Bearings: BALL
Grid is 1 inch square
A225 Fasco Furnace Draft Inducer Motor Assembly
A225 Fasco Furnace Draft Inducer Motor Assembly

A225 Fasco Furnace Draft Inducer Motor Assembly

Genuine OEM Part # A225Alternative Part Number(s)
Type: Shaded Pole; Diameter: 3.3"; HP: 1/15; Volts: 115; RPM: 3200; Speeds: 1; Amps: 2.25; Rotation: Clockwise; Bearings: BALL
Grid is 1 inch square
A225 Fasco Furnace Draft Inducer Motor Assembly
A225 Fasco Furnace Draft Inducer Motor Assembly
$304.95
Loading stock status
Loading stock status
Does this part fit my product?
Find your model number or log in to select it from your saved machines.
Type: Shaded Pole; Diameter: 3.3"; HP: 1/15; Volts: 115; RPM: 3200; Speeds: 1; Amps: 2.25; Rotation: Clockwise; Bearings: BALL
Loading stock status
$304.95
start a live chat with Repair Clinic customer support

This part A225 is compatible with:

Product Type:
Furnace

Related Articles & Videos

04:29
How This Part Works
Furnace Draft Inducer Fan Motor Replacement
00:45
Troubleshooting
Replace Furnace Filters - Tech Tips from Repair Clinic
02:47
Troubleshooting
Furnace Starts Then Stops — Furnace Troubleshooting
03:52
Troubleshooting
Furnace Not Heating — Furnace Troubleshooting
02:28
Troubleshooting
Furnace Blower Not Running — Furnace Troubleshooting

Draft Inducer Motor Assembly Customer Reviews

Common Problems Fixed by the Draft Inducer Motor Assembly

Based on customer reports and repair data, this part commonly fixes these issues:

About the Draft Inducer Motor Assembly

The draft inducer motor assembly draws air into the heat exchanger and then exhausts it out the flue. The pressure switch senses a pressure change and closes a switch to signal the control board that the furnace has proper air flow. If the draft inducer motor is defective, it may be unable to close the pressure switch, causing the ignition process to stall and the furnace to shut off after a few minutes. If the ignition process stalls, the furnace will shut off and take too long to heat the home. If the draft inducer motor assembly is at fault, replace it.

Alternative Part Number(s)

Replaces Part Number A225
Part Production Number 7021-11577
Part Production Number 7021-11577S
Part Production Number 7021-11830
Part Production Number 702111874